The best camera mounts depend on what you need to attach and where you plan to position it, from a field monitor to an action camera on a handlebar. These picks cover clamps, articulated arms, cages, and desk stands, so check the mounting interface, fit, and load limits against your camera setup.
Quick Top Products
SMALLRIG 9.8-Inch Magic Arm Clamp Kit
- Combines a super clamp and a 9.8-inch articulating arm.
- The clamp has 1/4-inch and 3/8-inch threads; both arm ends use 1/4-inch screws.
- Rubber cushions and 360-degree ball heads aid positioning and grip.
Best For: Filmmakers who need to position a monitor, light, or microphone away from a tube, shelf, or rig.
SmallRig Cool Ballhead Arm Super Clamp 1138
- Includes a super clamp and an action-camera mount adapter.
- Mounts to rods, tubes, tables, frames, and tripods without drilling.
- Supports up to 1.5 kg and uses a 1/4-inch-20 screw.
Best For: Creators who want to clamp a small camera or accessory to a desk, rod, or frame.
SmallRig Field Monitor Mount Holder BSE2346
- Fits 5- and 7-inch monitors and mounts through a cold shoe.
- Provides 360-degree swivel and 140-degree tilt.
- Supports monitors up to 1.2 kg and includes a hex spanner.
Best For: Video shooters mounting a 5- or 7-inch monitor on a cold shoe.
SmallRig 1/4-Inch Camera Hot Shoe Mount 2059
- The pack includes two mini ballhead mounts.
- Each mount combines a cold-shoe adapter and a 1/4-inch screw.
- The ballhead adjusts to different positions and supports up to 3 kg.
Best For: Camera operators who need two compact ballhead mounts for accessories or monitors.
SMALLRIG Foldable V Mount Battery Plate
- Combines an Arca-type baseplate and V-lock battery mount.
- Folds and adjusts by 180 degrees to make room for a flip screen.
- Fits mirrorless and DSLR cameras under 111 mm thick.
Best For: Mirrorless and DSLR users building a compact rig around a V-mount battery.
SMALLRIG 11-Inch Magic Arm Clamp 5311
- Pairs an 11-inch magic arm with a crab-shaped clamp.
- Uses a 1/4-inch-20 screw and retractable pins to resist twisting.
- Fits 15–40 mm tubes, tables, tripod legs, or stabilizer rings.
Best For: Vloggers and studio shooters who need a longer clamp-mounted arm for a lightweight camera or accessory.
SMALLRIG Super Clamp with 1/4- and 3/8-Inch Threads
- The clamp has 1/4-inch and 3/8-inch threads for accessories.
- Its jaw range is 15 mm to about 40 mm.
- Rubber pads help prevent slipping and scratches.
Best For: Creators who want a standalone clamp for accessories on shelves, bars, or tables.
SMALLRIG Camera Mount Clamp 4102B
- Includes a removable action-camera adapter and threaded accessory holes.
- The ballhead rotates 360 degrees for portrait or landscape positioning.
- For motion, the maximum weight is 350 g and speed should stay below 50 km/h.
Best For: Action-camera users mounting a lightweight setup to a motorcycle or bicycle handlebar.
SMALLRIG Magic Arm Clamp Kit
- The clamp and arm use an anti-deflection connection.
- A rotating triangular friction block grips flat surfaces and round tubes.
- The kit includes an action-camera mount and recommends a 1.5 kg load.
Best For: Creators who need a cushioned clamp and short magic arm for a small camera or accessory.
SMALLRIG Monitor Mount EVF Holder 2174
- Attaches through a 3/8-inch threaded hole for ARRI standard.
- Designed for 5- or 7-inch monitors weighing up to 1.5 kg.
- The rotation axis adjusts up to 146 degrees.
Best For: Video crews mounting a 5- or 7-inch monitor to a cage or handle with an ARRI locating hole.
Long-Reach Clamp-and-Arm Kit
SMALLRIG 9.8 Inches Magic Arm Clamp Kit with 1/4" and 3/8" Threaded Holes
This kit pairs a super clamp with a 9.8-inch articulating arm, giving you room to position an accessory rather than placing it directly at the clamp. The clamp has 1/4-inch and 3/8-inch threads, while the arm uses 1/4-inch screws at both ends.
Its ball heads rotate 360 degrees, and rubber cushions help grip the surface and protect mounted accessories. It can attach to objects from 15 mm to 54 mm thick.
The clamp and arm are made from aluminum alloy and stainless steel. Check that your mounting surface falls within the jaw range; the kit is not corrosion-resistant for seawater use.
Best For: Filmmakers who need to position a monitor, light, or microphone away from a tube, shelf, or rig.
| Pros | Cons |
|---|---|
|
|
Choose this kit when you want a clamp-mounted arm with more reach than a direct ballhead clamp. Its 9.8-inch arm and dual thread sizes make it adaptable for monitors, lights, and microphones.
Confirm the surface thickness and the accessory's connection before buying. The product information gives jaw limits and materials but does not specify a payload limit, so check suitability for the weight of your gear.
Compact Clamp with Action-Camera Adapter
SmallRig Cool Ballhead Arm Super Camera Clamp Mount Double Ball Adapter, Fence Desk Table Mount for Ronin-M for Insta360, for Gopro - 1138
The 1138 combines a super clamp, a double ball adapter, and an action-camera mount. It can attach to a rod, tube, table, frame, or tripod without drilling, and a locking knob secures the clamp.
The 1/4-inch-20 screw supports cameras and accessories such as webcams, monitors, lights, and microphones. Its maximum supported load is 1.5 kg.
The body combines aluminum and stainless steel, and the clamp has non-slip threads and an anti-twist structure. For moving setups, use a safety rope as advised, and keep the load within its stated limit.
Best For: Creators who want to clamp a small camera or accessory to a desk, rod, or frame.
| Pros | Cons |
|---|---|
|
|
This is a compact option for a desk, tube, or frame when you need both a clamp and an action-camera adapter. The 1/4-inch-20 screw also broadens its use to small monitors and lights, within the 1.5 kg limit.
Check that the jaws and mounting point suit your surface and camera cage. For a larger supported load or more arm reach, compare the other clamp kits and confirm their listed specifications before choosing.
Cold-Shoe Field Monitor Holder
SmallRig Field Monitor Mount Holder with Cold Shoe and 1/4" Inch Screw for 5 Inch and 7 Inch Monitor, with 360 Degree Swivel and 140 Degree Tilt, Rubber Cushion, Aluminum Alloy Build - BSE2346
This holder is designed for 5- and 7-inch field monitors and attaches through a cold shoe. A bottom 1/4-20 screw connects to the monitor, while the mount offers 360-degree horizontal swivel and 140-degree vertical tilt.
Its rubber cushions help prevent scratches and improve friction. The CNC-machined aluminum mount supports monitors weighing up to 1.2 kg, and the package includes a hex spanner.
This is a focused monitor mount rather than a general clamp: verify that your camera or support system has a suitable cold shoe and that your display stays within the supported size and weight.
Best For: Video shooters mounting a 5- or 7-inch monitor on a cold shoe.
| Pros | Cons |
|---|---|
|
|
Pick this holder when your main requirement is a compact cold-shoe mount for a 5- or 7-inch field monitor. Its swivel and tilt range give useful framing flexibility, while the rubber cushions protect the display contact points.
Check both monitor size and weight, and make sure your camera cage or support has a cold shoe. A cage-mounted monitor mount with an ARRI-style connection may fit better if your rig lacks that shoe.
Two-Piece Hot-Shoe Ballhead Set
SmallRig 1/4" Camera Hot Shoe Mount, Ballhead Tripod with Additional 1/4" Screw, 2pcs Pack - 2059
This two-piece pack contains mini ballhead mounts designed to attach through a cold shoe adapter. Each mount also has a 1/4-inch screw that can attach to a monitor, with a wingnut to lock the selected direction.
The ballhead adjusts to different viewing angles and is specified for a maximum load of 3 kg. The shoe adapter is described as compatible with most cameras from brands including Canon, Nikon, Olympus, Panasonic, and Fujifilm.
Check your accessory's connection and the available shoe before buying; this bundle supplies two mounts, which may be more than needed for a single-camera setup.
Best For: Camera operators who need two compact ballhead mounts for accessories or monitors.
| Pros | Cons |
|---|---|
|
|
Choose this set if you need two small ballheads for a camera rig or monitor arrangement. The cold-shoe adapter and 1/4-inch screw offer two practical connection points, and the stated 3 kg maximum load gives a clear limit to check.
It is a simple mounting solution without a clamp or long articulating arm, so confirm your setup has the right shoe or threaded interface and that you need both units.
Foldable V-Mount Battery Plate
SMALLRIG Foldable V Mount Battery Plate, All-in One Mounting Solution
This plate combines a V-lock battery mount with an Arca-type baseplate and folds to adjust the space behind the camera. Its 180-degree folding design can make room for a flip screen, and the plate is 3 cm thick when folded.
The Arca-type plate detaches for quick switching between handheld and tripod shooting; 1/4-20 and 3/8-16 screw holes remain at the bottom when it is removed. The plate is intended for mirrorless or DSLR cameras under 111 mm thick, with a stretchable base that extends up to 36.5 mm.
Check camera thickness, battery fit, and how the fold affects screen clearance in your rig.
Best For: Mirrorless and DSLR users building a compact rig around a V-mount battery.
| Pros | Cons |
|---|---|
|
|
This is best suited to a battery-powered camera rig where a V-mount plate, quick-release base, and folding clearance matter together. The Arca-type plate can detach for a faster change between handheld and tripod configurations.
Check camera thickness and screen clearance, and confirm that your battery and accessories suit the V-lock arrangement. It is a specialized camera plate rather than a general clamp or monitor holder.
11-Inch Action-Camera Clamp Arm
SMALLRIG 11" Magic Arm Clamp with 1/4"-20 Screw & Retractable Pins
The 5311 pairs an 11-inch magic arm with a crab-shaped clamp. Its 1/4-inch-20 screw and retractable pins help resist accessory twisting, and the included Allen wrench can tighten the connection further.
The clamp fits tubes, tables, tripod legs, and stabilizer rings from 15 to 40 mm in diameter. All joints can be loosened together with the wingnut, then locked in position.
The stated maximum payload is 1.5 kg. This longer arm works for positioning an action camera, monitor, light, or microphone, but check the clamp diameter and payload against your planned setup.
Best For: Vloggers and studio shooters who need a longer clamp-mounted arm for a lightweight camera or accessory.
| Pros | Cons |
|---|---|
|
|
Choose this arm when you want more reach for a lightweight accessory and need anti-twist features at the 1/4-inch connection. It accepts several common clamping surfaces within a defined diameter range and locks its joints with one wingnut.
Check the payload limit, especially with an extended arm, and confirm your accessory has the appropriate 1/4-inch interface or locating holes.
Threaded Super Clamp for Studio Surfaces
SMALLRIG Super Clamp with 1/4 and 3/8 Thread for Cameras, Lights, Umbrellas
This standalone super clamp offers 1/4-inch and 3/8-inch threaded holes for attaching camera accessories such as a ballhead or magic arm. Its jaws open from 15 mm to about 40 mm, so it can grip objects within that thickness range.
Rubber pads help reduce slipping and scratching at the clamp points. The body combines aluminum alloy and stainless steel.
Unlike a kit with an included arm, this product is just the clamp, so you will need a compatible accessory to position a camera or monitor. Check the surface thickness and thread type before building around it.
Best For: Creators who want a standalone clamp for accessories on shelves, bars, or tables.
| Pros | Cons |
|---|---|
|
|
This clamp suits a modular rig when you already own a compatible ballhead or arm. Its 1/4-inch and 3/8-inch threads give it several ways to connect accessories, while the jaw range makes surface thickness the main fit check.
Because it is a standalone clamp, budget for the positioning hardware separately if you need to orient a camera or monitor.
Handlebar Clamp with Motion-Use Limits
SMALLRIG Camera Mount Clamp, Gopro Motorcycle and Bike Handlebar Mount Kit
This clamp kit is designed for handlebars and other round or flat mounting surfaces. It has 1/4-inch-20 and 3/8-inch-16 threaded holes, a removable action-camera adapter, and a 360-degree ballhead for portrait or landscape positioning.
The jaws fit rods at least 14 mm in diameter and surfaces up to 65 mm thick. Its maximum load at rest is 3.5 kg, but the motion-use limit is much lower: 350 g, with a recommendation to avoid rough terrain, use a safety cord, and stay below 50 km/h.
Those limits make it important to check the actual moving setup, not just the static payload.
Best For: Action-camera users mounting a lightweight setup to a motorcycle or bicycle handlebar.
| Pros | Cons |
|---|---|
|
|
This is the specialized pick for handlebar footage, with a removable action-camera adapter and adjustable ballhead. Its static limit is not the right figure for riding: the notes set a 350 g maximum during motion and advise avoiding rough terrain, using a safety cord, and staying below 50 km/h.
Check the complete camera-and-adapter weight and make sure the clamp fits your handlebar before use.
Anti-Deflection Table and Tube Clamp Kit
SMALLRIG Magic Arm Clamp Kit, Camera Mount Friction Arm with Super Clamp
This kit combines a magic arm and super clamp with an anti-deflection connection at the joint. A flexible rotating triangular prism friction block helps the clamp grip flat surfaces such as a table edge, as well as round tubes.
One knob adjusts the device position, and the recommended load capacity is 1.5 kg. The kit includes an action-camera mount, and cushions on the clamp and arm help protect contact surfaces while adding friction.
It suits compact cameras, monitors, lights, webcams, action cameras, and microphones. Check the jaw fit for your surface and keep the full accessory weight within the recommended capacity.
Best For: Creators who need a cushioned clamp and short magic arm for a small camera or accessory.
| Pros | Cons |
|---|---|
|
|
Choose this kit when the clamp needs to grip a flat edge as well as a tube and the mounted gear is relatively light. The anti-deflection joint, friction block, and cushions address grip and positioning in a compact setup.
Compare its 1.5 kg recommended capacity with the full weight of your camera and accessory. Check whether the included action-camera mount matches your camera cage.
ARRI-Style Monitor and EVF Support
SMALLRIG Monitor Mount EVF Holder Support with Locating Pins for ARRI Standard - 2174
This monitor support attaches to a cage or handle through a 3/8-inch threaded hole for ARRI standard. It is sized for 5- or 7-inch monitors and supports up to 1.5 kg.
A rotation axis allows up to 146 degrees of positioning, and a thumbscrew enables hand tightening for quick attachment. If your cage lacks ARRI locating holes, the notes describe using an optional Mini Plate 2171 with two 1/4-inch threaded holes.
Check the connection standard on your rig and the monitor's weight before buying; this mount is specialized for a compatible video setup.
Best For: Video crews mounting a 5- or 7-inch monitor to a cage or handle with an ARRI locating hole.
| Pros | Cons |
|---|---|
|
|
This mount fits a video rig already built around ARRI locating holes and a compact field monitor. Its 146-degree rotation and hand-tightened attachment suit quick monitor adjustments.
Before buying, confirm the cage or handle connection and check the monitor's weight and size. If your rig has only 1/4-inch threaded holes, account for the optional Mini Plate rather than assuming a direct fit.
How to Choose Camera Mounts
How We Picked Camera Mounts
This roundup focuses on mounts that hold or position a camera, monitor, or accessory on a rig, support surface, or handlebar. It includes clamp-and-arm kits for flexible placement, direct monitor holders for field displays, a cold-shoe ballhead set, a specialized V-mount battery plate, and a handlebar mount with motion-specific limits.
Fit and interface were central to the selection. A clamp must match the thickness or diameter of its surface, while a monitor holder needs the right cold shoe, 1/4-inch screw, or ARRI-style connection.
Where a load limit or screen size is provided, those details help narrow the intended use. Camera cages and handles made for particular bodies were left out because they do not serve as broadly useful mounting options for this category.
Comparing Camera Mount Types
The biggest difference is how each mount attaches. The SmallRig 1138 and the 9.8-inch clamp kit grip a support surface; the latter adds a longer articulating arm and both 1/4-inch and 3/8-inch threads.
The standalone super clamp is more modular because it supplies the clamp without an arm. Check the jaw range and whether you already own the accessory hardware needed to position your gear.
Monitor mounts trade broad utility for a more specific connection. The BSE2346 uses a cold shoe and is sized for 5- or 7-inch displays, while the 2174 fits an ARRI-style 3/8-inch connection and supports monitors up to 1.5 kg.
The two-piece ballhead set is a simpler route for compact accessories when a cold shoe or 1/4-inch screw is available. The V-mount plate serves a different job: battery and camera support with folding and quick-release features.
For moving footage, check motion-use limits rather than relying on a clamp's static capacity. The 4102B specifies a lower maximum load during motion, gives a speed limit, and advises using a safety cord and avoiding rough terrain.
For any extended arm, consider the weight and position of the complete accessory setup, then verify the mount's stated payload and attachment fit.
| Product | Standout features | Best for |
|---|---|---|
| SMALLRIG 9.8-Inch Magic Arm Clamp KitCheck Price |
| Filmmakers who need to position a monitor, light, or microphone away from a tube, shelf, or rig. |
| SmallRig Cool Ballhead Arm Super Clamp 1138Check Price |
| Creators who want to clamp a small camera or accessory to a desk, rod, or frame. |
| SmallRig Field Monitor Mount Holder BSE2346Check Price |
| Video shooters mounting a 5- or 7-inch monitor on a cold shoe. |
| SmallRig 1/4-Inch Camera Hot Shoe Mount 2059Check Price |
| Camera operators who need two compact ballhead mounts for accessories or monitors. |
| SMALLRIG Foldable V Mount Battery PlateCheck Price |
| Mirrorless and DSLR users building a compact rig around a V-mount battery. |
| SMALLRIG 11-Inch Magic Arm Clamp 5311Check Price |
| Vloggers and studio shooters who need a longer clamp-mounted arm for a lightweight camera or accessory. |
| SMALLRIG Super Clamp with 1/4- and 3/8-Inch ThreadsCheck Price |
| Creators who want a standalone clamp for accessories on shelves, bars, or tables. |
| SMALLRIG Camera Mount Clamp 4102BCheck Price |
| Action-camera users mounting a lightweight setup to a motorcycle or bicycle handlebar. |
| SMALLRIG Magic Arm Clamp KitCheck Price |
| Creators who need a cushioned clamp and short magic arm for a small camera or accessory. |
| SMALLRIG Monitor Mount EVF Holder 2174Check Price |
| Video crews mounting a 5- or 7-inch monitor to a cage or handle with an ARRI locating hole. |
Choosing a Camera Mount for Your Setup
For a desk, table edge, or studio support, compare the clamp jaw range with the actual surface. The 9.8-inch kit includes an arm for positioning a monitor or light away from the clamp; the standalone clamp is suitable if you already have a compatible arm.
Cushions can help protect contact points, but they do not replace checking fit and tightening the mount correctly.
For camera monitors, start with screen size, weight, and the attachment point on your cage or handle. A cold-shoe model is convenient when the shoe is available.
An ARRI-style mount can be a better fit for a cage built with locating holes, while the optional plate mentioned for the 2174 adds another part to a rig that lacks them. Check portrait or landscape orientation needs and the adjustment range before choosing.
For action-camera clamps, confirm the adapter matches your camera or cage and that the clamp fits the bar, table, or tripod leg. The handlebar model includes specific guidance for moving use, while desk and studio clamps are better suited to stationary setups.
Keep the full camera and accessory load within the applicable limit.
Who Should Buy Which Camera Mount
Choose a clamp-and-arm kit if you need to position accessories around a desk, tube, or studio rig. Pick a monitor holder when you need a defined cold-shoe or ARRI-style connection and your display matches its supported size and weight.
The two-piece ballhead set suits someone who wants simple, compact mounting points for more than one accessory.
For a camera rig built around a V-mount battery, the folding plate combines power support and an Arca-type base. For handlebar footage, the 4102B is the most targeted option here, provided the moving load and riding conditions stay within its stated limits.
Match the mount to the surface, interface, and full rig weight before ordering.