The Donner DP-1 Guitar Power Supply review is for players who want to power multiple effects from one compact unit and need more than one output voltage.
Its ten outputs and included cables make it worth considering for a varied pedalboard, with an important caveat: Donner describes the outputs as isolated through circuit design, but says this does not mean absolute circuit isolation.
Donner DP-1 Review Summary
The quick verdict

7,000+ ratings
Read Amazon ReviewsDonner DP-1 Guitar Power Supply
A compact option for guitarists who need several pedal outputs, including 9V, 12V, and 18V connections, on one board.
- Ten DC outputs: seven 9V/100mA, one 9V/500mA, one 12V/100mA, and one 18V/100mA.
- AC input range of 100V–240V, with an 18V DC supply input.
- Ten power cables are included.
- Independent short-circuit protection is intended to keep other outputs working if one output is short-circuited.
Pros
- Ten outputs help reduce the need for multiple individual pedal supplies.
- The mix of 9V, 12V, and 18V connections supports pedals with different voltage requirements.
Consider before buying
- Most outputs are rated at 100mA, so check the current draw of every pedal before assigning it a connection.
- Only one output is listed at 500mA; a board with several higher-current pedals may need another power arrangement.
Read the full review summary
The DP-1 offers seven 9V outputs rated at 100mA, one 9V output rated at 500mA, one 12V output rated at 100mA, and one 18V output rated at 100mA.
That spread can suit a board with several compatible pedals, while the higher-current 9V output gives you one option for a pedal with a greater current requirement than the other 9V connections.
Its aluminum-alloy enclosure, ten included power cables, short-circuit protection, and blue indicator light make it a practical all-in-one board accessory.
The key buying step is to compare each pedal's voltage and current requirements with the DP-1's output ratings; the total number of sockets alone does not establish compatibility.
The buying factors
Donner DP-1 Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Output variety
Ten outputs cover three voltages, including one 9V connection rated at 500mA.
Output count
Ten connections can serve a multi-pedal board, subject to each pedal's requirements.
Current flexibility
The single 500mA output is useful, while the other listed outputs are rated at 100mA.
Board-friendly design
The compact rectangular form and lightweight aluminum-alloy enclosure are suited to a pedalboard setup.
Fault handling
Independent short-circuit protection is designed to let unaffected outputs keep working if one output shorts.
Isolation clarity
The design aims for an isolation effect, but the manufacturer cautions that it is not absolute circuit isolation.
Key Features and Specifications of Donner DP-1
- Ten DC outputs: seven 9V/100mA, one 9V/500mA, one 12V/100mA, and one 18V/100mA.
- AC input range of 100V–240V, with an 18V DC supply input.
- Ten power cables are included.
- Independent short-circuit protection is intended to keep other outputs working if one output is short-circuited.
- Blue LEDs indicate output status and provide light for the pedalboard.
- Aluminum-alloy enclosure in a compact rectangular form.
- Donner describes a circuit-simulation design intended to create an isolation effect, while noting it is not absolute circuit isolation.
Pros and Cons of Donner DP-1
Pros
- Ten outputs help reduce the need for multiple individual pedal supplies.
- The mix of 9V, 12V, and 18V connections supports pedals with different voltage requirements.
- One 9V output is rated at 500mA for a pedal requiring more current than the 100mA outputs provide.
- Short-circuit protection is independent for each output, according to the design description.
- Power cables are included, and the aluminum-alloy enclosure is described as light and portable.
Consider before buying
- Most outputs are rated at 100mA, so check the current draw of every pedal before assigning it a connection.
- Only one output is listed at 500mA; a board with several higher-current pedals may need another power arrangement.
- The isolation effect is not described as absolute circuit isolation, which may matter to players seeking fully isolated outputs.
Who Should Buy Donner DP-1?
Good fit
Consider the DP-1 if your board has several pedals with compatible DC voltage and current requirements and you want one supply unit with ten outputs.
The selection of 9V, 12V, and 18V outputs is useful when your effects do not all share the same voltage, and the included cables help you connect a multi-pedal setup.
Before buying, make a list of each pedal's required voltage, polarity, and current draw, then check those details against the supply and cable connections.
Pay particular attention to the 100mA ratings: the DP-1 lists only one 9V output at 500mA, so don't assume every socket can power a higher-draw effect.
It may also suit a player who values independent short-circuit protection and a compact aluminum-alloy enclosure.
Treat the isolation language carefully: the design aims to provide an isolation effect, but Donner explicitly qualifies that it is not absolute circuit isolation.
Who should skip it
Skip this supply if your pedalboard requires more than one output above the listed 100mA ratings and the single 500mA output does not meet your needs. Confirm the current draw of the complete board before choosing it.
Look for a different design if absolute circuit isolation is a firm requirement. The DP-1's described circuit design aims for an isolation effect but does not promise absolute isolation.
How the Donner DP-1 Fits a Multi-Pedal Board
Match outputs to pedal requirements
The DP-1's ten-output count is only useful when the voltage and current ratings line up with the pedals on your board.
Its seven 9V/100mA outputs cover several low-current-compatible positions, while the separate 9V/500mA output offers more headroom for one 9V pedal.
The 12V and 18V outputs are each rated at 100mA, so check both voltage and current rather than relying on voltage alone.
Understand the isolation qualification
Donner describes circuit simulation and design as creating an isolation effect for the independent supply outputs, then clarifies that this is not absolute isolation in the circuit. That qualification matters to players selecting a supply specifically for isolation.
If your rig has strict isolation needs, verify that the DP-1's stated approach meets them before building the board around it.
Protection and indicators on a working board
Independent short-circuit protection is intended to let the other outputs continue operating if one output is shorted. The blue LEDs indicate outputs and can also add light around the board.
These features may make setup and fault checks more convenient, though they do not replace checking connections and pedal requirements.
A compact supply with included leads
The aluminum-alloy enclosure is described as light and portable, and ten power cables are included.
That makes the package suitable to consider for a board where a single supply and multiple leads are preferable to a collection of separate adapters.
Check the physical space available on your board and confirm that the supplied cables match the connections your pedals use.
Alternatives to Donner DP-1
The supplied candidate is a pedalboard mounting accessory rather than a competing power supply, so it does not provide a like-for-like alternative.
Guitar & Bass Accessories alternative

1,000+ ratings
Read Amazon ReviewsDonner Pedalboard Pedal Tape
Choose the DP-1 when you need electrical power for pedals. The tape serves the different task of mounting pedals, so it is relevant only if securing effects to a board is also part of your setup.
- This 2m-long, 50mm-wide hook-and-loop tape is for attaching pedals to a pedalboard; it is not a power supply.
- The DP-1 supplies compatible effects through ten DC outputs at 9V, 12V, and 18V.
Is Donner DP-1 Worth It?
The Donner DP-1 is worth considering for a multi-pedal board that can work within its ten output ratings: seven 9V/100mA, one 9V/500mA, one 12V/100mA, and one 18V/100mA.
It combines multiple connections, included cables, an aluminum-alloy enclosure, and independent short-circuit protection in one unit.
Buy only after matching the voltage and current needs of each pedal, and take Donner's isolation qualification seriously if that feature is central to your setup.
Its output mix is useful for compatible boards, but the single 500mA connection and non-absolute isolation description make it a less straightforward fit for rigs needing several higher-current or strictly isolated outputs.
Your review at a glance

7,000+ ratings
Read Amazon ReviewsDonner DP-1 Guitar Power Supply
A compact option for guitarists who need several pedal outputs, including 9V, 12V, and 18V connections, on one board.
- Ten DC outputs: seven 9V/100mA, one 9V/500mA, one 12V/100mA, and one 18V/100mA.
- AC input range of 100V–240V, with an 18V DC supply input.
- Ten power cables are included.
- Independent short-circuit protection is intended to keep other outputs working if one output is short-circuited.