The FIFINE BM63 review comes down to a practical choice: a reinforced scissor arm with a stated capacity of up to 2 kg, broad positioning range, and a clamp for desks no thicker than 2 inches.
It suits creators who want to bring a microphone within reach, then fold the arm aside when recording is over.
FIFINE BM63 Review Summary
The quick verdict

800+ ratings
Read Amazon ReviewsFIFINE BM63
A sturdy, foldable boom arm for podcasters, streamers, and gamers who want flexible mic positioning and a clearer desk surface.
- Reinforced metal scissor arm with a stated load capacity of up to 2 kg.
- Adjustable joints with up to 180 degrees of vertical movement and 135 degrees horizontally.
- Foldable arm design that can be moved toward a desktop corner when not in use.
- Desk clamp intended for desktop thicknesses of 2 inches or less.
Pros
- The up-to-2-kg capacity makes the stand suitable for a range of microphone setups without requiring a floor base.
- Its scissor-style movement offers useful flexibility for adjusting mic position between speaking and gaming or recording.
Consider before buying
- The clamp’s stated desk-thickness limit is 2 inches, so thicker desktops need a measurement check before purchase.
- The included mounting screw is 5/8 inch; confirm that your microphone or mount uses a compatible thread.
Read the full review summary
The BM63 focuses on straightforward desktop utility. Its metal scissor arm supports microphones up to 2 kg, attaches with a C-clamp, and offers vertical and horizontal adjustment.
Three included hook-and-loop ties help route a cable along the setup, while the foldable design makes it easier to reclaim desk space between sessions.
This stand is a sensible match for podcasting, streaming, gaming, and voice recording when you want a suspended microphone position without a floor stand.
Check your microphone’s weight, its mount thread, and your desk thickness before buying; the arm uses a universal 5/8-inch screw and the clamp is specified for desktops up to 2 inches thick.
The buying factors
FIFINE BM63 Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Load capacity
The stated maximum of up to 2 kg covers a useful range of microphone setups, provided the full mounted load stays within that limit.
Positioning flexibility
Vertical adjustment up to 180 degrees and horizontal adjustment up to 135 degrees give creators room to set a working position.
Desk space
The arm folds aside after use, and suspending the microphone can leave more of the desktop open.
Mount compatibility
A 5/8-inch screw and named FIFINE microphone examples offer a clear starting point, though buyers should confirm their microphone’s thread.
Setup simplicity
The clamp-on format and included ties keep the basic installation focused on the desk edge and cable routing.
Vibration isolation potential
Keeping the microphone off the desk may help reduce transmitted low-frequency vibration, but results depend on the desk, arm, and recording setup.
Key Features and Specifications of FIFINE BM63
- Reinforced metal scissor arm with a stated load capacity of up to 2 kg.
- Adjustable joints with up to 180 degrees of vertical movement and 135 degrees horizontally.
- Foldable arm design that can be moved toward a desktop corner when not in use.
- Desk clamp intended for desktop thicknesses of 2 inches or less.
- Universal 5/8-inch screw; listed as compatible with FIFINE K658, K688, A8, and other microphones.
- Package includes the boom arm, desk clamp, three hook-and-loop cable ties, and user manual. The microphone is not included.
Pros and Cons of FIFINE BM63
Pros
- The up-to-2-kg capacity makes the stand suitable for a range of microphone setups without requiring a floor base.
- Its scissor-style movement offers useful flexibility for adjusting mic position between speaking and gaming or recording.
- The arm can fold away, helping keep a compact desk usable when the mic is not needed.
- Suspending the microphone above the desk may help limit vibration transfer from desk contact.
Consider before buying
- The clamp’s stated desk-thickness limit is 2 inches, so thicker desktops need a measurement check before purchase.
- The included mounting screw is 5/8 inch; confirm that your microphone or mount uses a compatible thread.
- The microphone is not included, and the three cable ties are the only cable-management pieces listed.
Who Should Buy FIFINE BM63?
Good fit
Consider the BM63 if you want an adjustable desktop arm for podcasting, streaming, gaming, or voice recording and your microphone setup weighs no more than 2 kg.
The clamp-on design avoids taking up floor space, and the folding arm is useful when the desktop also serves as a work or gaming surface.
Before ordering, measure the desk edge where the clamp will sit and check the microphone’s mounting thread and total mounted weight.
If those basics match, the BM63 offers a simple way to position a mic near speaking height and move it aside when the session ends.
Who should skip it
Look for another mounting approach if your desktop is thicker than 2 inches or your microphone setup exceeds the stated 2-kg capacity.
Buyers who need a different thread should verify whether their existing microphone mount can adapt to the 5/8-inch screw.
This design is less compelling if you need a low-profile arm that stays below a monitor or want integrated cable channels; the BM63’s described advantages center on scissor-arm flexibility, foldability, and included ties.
How the FIFINE BM63 Fits a Recording Desk
Positioning a microphone where you need it
The BM63’s two adjustment directions make it possible to move a microphone toward a seated speaker and reposition it as the desk routine changes.
Its listed ranges—up to 180 degrees vertically and 135 degrees horizontally—are useful when you want to clear the mic from a keyboard or bring it closer for a recording session.
The practical range will still depend on where the clamp sits and the shape of the desk.
Matching the arm to your microphone
The maximum capacity is up to 2 kg, so assess the entire mounted setup rather than the microphone alone if you plan to attach extra hardware.
The stand uses a 5/8-inch screw, and the product description names several FIFINE models as compatible. For any other microphone, check the thread or existing mount before buying rather than assuming the term “universal” guarantees a direct fit.
Keeping the desktop usable
A suspended microphone can free the surface below it, and the foldable arm can be moved toward a corner after use. This makes sense for a shared desk where the mic is only one part of the setup.
The three hook-and-loop ties can help keep a cable near the arm, though buyers with a more elaborate cable-routing plan may want to consider what extra organization their workspace needs.
What vibration reduction can and cannot do
Holding a microphone away from direct desk contact may reduce some low-frequency vibration reaching it from bumps or typing.
The BM63’s support structure is designed with this use in mind, but the result depends on the microphone, desk, clamp placement, and activity around the setup.
Treat the arm as one part of a recording arrangement, not a substitute for managing noise at its source.
Alternatives to FIFINE BM63
Microphone Stands alternative

5,000+ ratings
Read Amazon ReviewsFIFINE BM88
Choose the BM63 if its stated load capacity and scissor-arm format suit your setup and you prefer a folding arm.
Consider the BM88 if a low-profile path under a screen, broader listed rotation, integrated cable routing, or multiple thread adapters would better fit your desk and microphone.
- The BM88 uses a low-profile stick-arm design, extends to 29 inches, and adjusts up to 220 degrees vertically and 360 degrees horizontally.
- It includes a rotatable ball head and adapters for 1/4-inch, 3/8-inch, and 5/8-inch threads, along with hidden cable management.
- Its clamp is specified for desktops 0.8 to 2.4 inches thick.
- The BM63 is a foldable scissor arm rated for up to 2 kg, with a 5/8-inch screw and movement up to 180 degrees vertically and 135 degrees horizontally.
Microphone Stands alternative

5,000+ ratings
Read Amazon ReviewsFIFINE BM88W
The BM63 is the more direct fit for someone seeking a foldable scissor arm and whose desk is within its clamp limit.
The BM88W is worth considering if you prefer a white low-profile design with integrated cable management and broader listed thread compatibility.
- The BM88W is a white low-profile arm that extends to 29 inches, moves up to 220 degrees vertically and 360 degrees horizontally, and includes a ball head, cable management, and adapters for 1/4-inch, 3/8-inch, and 5/8-inch threads.
- Its clamp fits desktops 0.8 to 2.4 inches thick.
- The BM63 has a scissor-arm layout, a 5/8-inch screw, and a clamp intended for desks up to 2 inches thick.
Is FIFINE BM63 Worth It?
The FIFINE BM63 is worth considering if you need a compact clamp-on microphone arm with a useful adjustment range, fold-away storage, and a stated capacity up to 2 kg.
Its strongest fit is a desk-based creator who wants to reposition a microphone without leaving the arm in the way between sessions.
Measure the desk, confirm the microphone mount thread, and keep the complete setup within the arm’s stated capacity.
If those conditions fit, the BM63 is a practical, flexible stand; if a low-profile path or multiple included thread adapters matter more, compare the alternative designs before choosing.
Your review at a glance

800+ ratings
Read Amazon ReviewsFIFINE BM63
A sturdy, foldable boom arm for podcasters, streamers, and gamers who want flexible mic positioning and a clearer desk surface.
- Reinforced metal scissor arm with a stated load capacity of up to 2 kg.
- Adjustable joints with up to 180 degrees of vertical movement and 135 degrees horizontally.
- Foldable arm design that can be moved toward a desktop corner when not in use.
- Desk clamp intended for desktop thicknesses of 2 inches or less.